Showing all 12 results

Show sidebar
enersys-datasafe-np-npx-battery
Close

EnerSys DataSafe NP/NPX

The DataSafe NPX range of valve regulated lead acid batteries has been developed to provide optimal performance and offer superior value in high rate discharge applications. Used primarily where high power is required for a short duration, these monoblocs are ideally suited for small UPS and general electronics applications such as security and alarms systems, booster packs, leisure and toys, etc.
enersys-hawker-evolution-battery
Close

EnerSys Hawker Evolution

Hawker Evolution batteries are valve regulated gas recombination batteries with gelled electrolyte, accepting up to 80% DOD/C5. This range is suitable for use in forklift trucks, pallet trucks, electric vehicles and automatic transport systems for low and normal duty applications. The full benefits of Hawker evolution's high performance is optimised by using the battery in combination with Hawker high frequency smart chargers: Lifetech, Lifeplus or Life IQ, that allow a short charging time of only 8 hours in condition of 60% DOD or 12 hours charging time at 80% DOD/C5. The robust design of a traction cell is based on tubular positive plates (PzS type). Alloy (lead calcium with tin for the positive plate), the active mass and separator are adapted for the performance requirements of the battery. With minimal gas emissions it is ideal for use in sensitive environments such as the food industry. The Hawker Evolution battery range is available in DIN and BS dimensions, complying with standards DIN/EN 60254-2 and IEC 254-2.
enersys-hawker-perfect-plus-battery
Close

EnerSys Hawker Perfect Plus

Hawker Perfect Plus motive power batteries provide a high level of power and reliability for all industrial truck operations, from simple applications with a low capacity loading up to heavy duty multi-shift work. Hawker Perfect Plus batteries provide higher efficiency in discharge, which is achieved by the use of advanced components in the construction of the positives plates. The sizing of plates has been optimised according to volume available in the cell boxes and the process of filling the positive plates has been improved. All these technical enhancements have enabled an increase in the cell capacities while retaining the same exterior dimensions. All Hawker Perfect Plus cells use the robust tubular vented technology (PzS). The positive electrodes are diecast tubular plates (PzS) and advanced components used in their manufacture provide increased efficiency. The negative plates are flat pasted plates. The separator is of the microporous type. The cell box and lid are made from high impact, temperature resistant polypropylene and are heat-seal welded to prevent electrolyte leakage.
enersys-modular-all-charger
Close

Enersys Modular Chargers

Hawker Lifetech and Life iQ Modular Chargers were launched as a result of the success of LifeSpeed IQ 7kW modular chargers. Further research and development of 1kW and 3.5kW modular designs satisfy the wider material handling equipment market and to comply with worldwide standards. As a result of this extension, EnerSys is now offering a complete range of premium products from 1kW to 42kW with the best efficiency and performance on the market. EnerSys offers two charger ranges: NexSys and NexSys+. Both provide operational flexibility and charging features to ensure to get the optimum life from NexSys battery. Available in single and three phase, they have multi voltage and multi capacity adaptation and offer both standard and fast charge options. In addition, the Thin Plate Pure Lead technology which is at the heart of NexSys batteries makes them ideal for fast and opportunity charging. Both chargers provide operational flexibility and charging features to ensure you get the optimum life from your NexSys battery.
enersys-power-bloc-battery
Close

EnerSys PowerBloc

Powerbloc and Powerbloc Dry are ranges of bloc batteries for all applications in small traction from cleaning machines to pallet trucks, industrial electric vehicles, aerial platforms, Automated Guided Vehicles, as well as domestic applications like wheelchairs, golf carts. Constructed with the highest quality materials, the blocs can be recharged with HF or 50 HZ chargers.
enersys-powersafe-opzs-battery
Close

EnerSys PowerSafe OPzS

The EnerSys range of PowerSafe OPzS batteries has been designed for use in all standby power applications that demand the highest levels of reliability and security. PowerSafe OPzS cells benefit from an optimised plate design that results in increased capacity compared to the requirements of the internationally recognised DIN standard. In addition, the flooded tubular plate technology offers excellent cycling performance together with a proven long life under float voltage conditions, for a truly flexible solution. The specification of the PowerSafe OPzS cells make it ideal for a wide range of applications such as telecommunications, power generation and distribution, railway, airport and seaport signalling, computing, emergency lighting, automation and measuring systems.
enersys-powersafe-opzv-battery
Close

EnerSys PowerSafe OPzV

The EnerSys range of PowerSafe OPzV batteries is suitable for a broad range of applications including telecommunications, power generating stations and distribution systems, railway, airport and seaport signalling, computing, emergency lighting, automation and measuring systems. The PowerSafe OPzV range of valve regulated lead-acid batteries uses a proven combination of gel and tubular technologies to offer a very high level of reliability. These single cells benefit from an optimised plate design that gives capacities in excess of the DIN standard values. In addition, the PowerSafe OPzV range of batteries offers both an excellent float life and a high cycle life for a truly flexible solution.
enersys-powersafe-sbs-eon-battery
Close

EnerSys PowerSafe SBS Eon

The outstanding EON Technology® of EnerSys® further extends the technical leadership of PowerSafe® SBS® batteries: not only do PowerSafe SBS EON Technology cells and monoblocs retain the benefits typically associated with EnerSys Thin Plate Pure Lead Technology (long life, high energy density, superior shelf life, etc.), they also deliver exceptional cyclic performance in both float and fast charge applications, even in the hottest and harshest operating environments. Where conventional VRLA AGM batteries struggle to cope with harsh conditions and frequent power outages, EON Technology makes PowerSafe SBS 2V and 12V batteries the perfect solution for the challenging operating conditions of today’s telecommunication networks. The specification of PowerSafe SBS EON Technology also makes SBS B14 - 3900 suitable for large-scale UPS and off-grid energy storage applications. The PowerSafe SBS EON Technology battery range is available in several configurations: the front terminal SBS B14 - 190F designs which make installation and inspection quick and easy, the classic top terminal SBS 410 design and the SBS 320 - 3900 series which offers industry-leading capacities (up to 3900Ah) in OpzV’s DIN container sizes. For superior energy and power, high performance and proven reliability, there is no substitute to PowerSafe SBS EON Technology batteries.
enersys-powersafe-ts-battery
Close

EnerSys PowerSafe TS

The PowerSafe TS range of single cells offers high performance, long life solutions for renewable energy applications. PowerSafe TS cells are based on proven vented technology and designed for renewable energy applications that require maximum cycle life with the highest level of reliability. They are particularly suitable for use in solar energy installations, ensuring a continuity of electrical supply during the hours of darkness or during periods of reduced sunshine. Reduced maintenance is achieved through the use of additional electrolyte which means cells only have to be topped-up once a year. This helps to keep down maintenance costs and makes them an ideal solution for many remote or unmanned locations. Tubular positive plates are widely used in batteries for particularly demanding applications. In the PowerSafe TS range they have been optimised to give an extended cycle life and increased capacity.
enersys-powersafe-v-battery
Close

EnerSys PowerSafe V-TT

The EnerSys range of PowerSafe V-TT batteries has been designed specifically for use in applications that demand the highest levels of security and reliability. With proven compliance to the most rigorous international standards, PowerSafe V-TT batteries are recognised worldwide as a premium solution for Telecom applications. The reputation of PowerSafe V-TT batteries for long service life, together with excellent high rate performance, also makes them the number one choice for high integrity, high specification UPS systems. PowerSafe V-TT cells and monoblocs deliver superior performance whilst occupying less space than conventional standby power batteries. The use of V-0 rated, flame retardant, ABS plastic for the thick wall containers and lids offers high mechanical strength with excellent safety features. PowerSafe V-TT batteries are designed using proven gas recombination technology that removes the need for regular water addition by controlling the evolution of hydrogen and oxygen during charging. Oxygen evolved at the positive plates diffuses through microporous separators to the negative plates and, by a series of chemical reactions within the cell, recombines to form water. Each cell incorporates its own safety valve that allows the controlled release of gas when pressure builds up within the cell.
enersys-hawker-water-less-battery
Close

EnerSys Water Less

Hawker Water Less batteries are at the leading edge of battery technology, bringing added efficiency to your business and a high level of power and reliability. They're designed to provide more flexibility and more time due to longer topping up intervals of 4, 8 or 13 weeks depending on charging technology. This means reduced labour costs for topping up batteries – up to 60 % (with Hawker 50 Hz chargers) and up to 75 % (with Hawker HF smart chargers). All Hawker Water Less cells use proven PzS technology. The positive electrodes are diecast tubular plates (PzS) and advanced components used in their manufacture provide increased efficiency. The negative plates are flat pasted plates. The separator is of the microporous type. Constructional specifications like a larger electrolyte capacity, a reduced prism height and new flip top plugs ensure added value. In addition, a low electrolyte level indicator fitted on the battery informs you when water topping up is needed. Optional equipment: Aquamatic (automatic water filling system), Electrolyte circulation, Easyplus and Wi-IQ. Easyplus and Wi-IQ are electronic devices that communicate with Hawker HF chargers and deliver the information about battery performance and faults.